![]() Intensity Control Mode (single change mode) Uses Startup Colors you have set, and gives you an intensity control of that color (ie: dim up/down on the startup color).Ĭlick to learn more about QuickPlay Pro 2 and the Commissioning Process by reading the quick start guide. Sets a default brightness level when the fixture is powered on, but receiving no data (0 black - 255 full). Linear - A dimming curve with a linear relationship between DMX input and LED power. This curve offers the most control at low intensities. Tungsten - A non-linear dimming curve that emulates the dimming curve of incandescent lamps on a DMX dimmer. Normal - (Factory default) use this dimming curve to achieve consistent dimming behavior in an installation where the luminaire is installed alongside other Color Kinetics luminaires that don’t have dimming curve functionality. ColorDial Pro is an Ethernet-based, stand-alone lighting controller and interface for intelligent RGB and intelligent white (iW) LED lighting fixtures from. In some cases, you may want to slow down the reaction speed to achieve smoother transitions when the intensity of different LED channels changes.įast - (Factory default) sets instant LED reaction to control data.ĭelay-1 (shortest delay) – Delay-4 (longest delay) for smoother transitions. Normally, LEDs react to DMX or other control data instantaneously. The luminaire accepts three channels of DMX data, and sends output to the RGB LED channels. The luminaires accepts four channels of DMX data, and sends output to all four LED channels. The luminaire accepts three channels of DMX data. The luminaire accepts four channels of DMX data.Īllows for direct control of each individual LED channel. (Factory default) the luminaire accepts three channels of DMX data and sends output to four LED channels. Use QuickPlay Pro 2 to configure luminaires, and change factory default settings such as changing DMX addresses.Ĩ-bit (factory default) or 16-bit Color Data Resolution. Works seamlessly with the complete Color Kinetics line of controllers, including ColorDial Pro, iPlayer 3, and Light System Manager – as well as third-party controllers.Įach Fle圎ite node is individually addressable and factory default to DMX 1. PDS-400 48V CA4 or CM-550 48V CA with Power Supply The following tables summarize addressing and configuration details, and the most commonly used Device Configuration properties in QuickPlay Pro 2. QuickPlay Pro 2 displays the available properties in the Device Type for Device Configuration in the Settings Tool. Some items in this family are eligible for our North American Made to Stock program.Fle圎lite IntelliHue configuration optionsĬolor Kinetics Devices – Ethernet PDS, Ethernet Luminaires, Powercore Luminaires, Fle圎lite Luminaires, and RDM Luminaires offer a variety of properties as part of Device Configuration. ![]() Decora faceplate hides mounting hardware for a clean look that blends with a variety of architectural styles. ![]() ![]()
0 Comments
Leave a Reply. |